is seeking certified and qualified DBE subcontractors and/or suppliers to provide Stewart Engineering Inc. is requesting quotes from all qualified subcontractors and suppliers including certified UDBE/DBE/SBE/DVBE for all or any part of the following items: Construction Surveys, Traffic Control System, Job Site Management, Prepare Storm Water Pollution Prevention Plan, Rain Event Action Plan, Storm Water Sampling and Analysis Day, Storm Water Annual Report,Temporary Check Dam, Temporary Fiber Roll, Temporary Silt Fence, Temporary Concrete Washout, Health and Safety Plan, Remove Concrete Driveway, Remove Railroad Track, Salvage Steel Grating, Clearing and Grubbing, Roadway Excavation, Structure Excavation, Structure Backfill, Ditch Excavation, Embankment, Subgrade Enhancement Geotextile, Subgrade Enhancement Geogrid, Geosynthetic Reinforcemet, Rolled Erosion Control Product, Fiber Rolls, Hydrdoseed, Class 2 Aggregate Base, Clean Ballast Rock, Ballast Rock, Replace AC Surfacing, Hot Mix Asphalt, Furnish and Drive Piling Class 90, Furnish and Drive 24 In. Cast-in-Steel-Shell Concrete Piling, Structural Concrete, Drill and Bond Dowel, Furnish and Erect Precast Prestressed Slab, Bar Reinforcing Steel, Deck Seal, Treated Lumber and Timber, Clean and Paint Steel Piling Shell, Clean and Paint Galvanized Pedestrian Railing, Repair Spalled Surface Area, HDPE Gate, Plastic Pipe, RSP, Minor Concrete, Lighting System, Fencing, Striping, Signage, Treated Timber Crosstie,
Humboldt Bay Trail South Project
Project No.: RPSTPL-5904(143), RPL-5904(180), & ATPL-5904(182) Contract No. 715036
County of Humboldt Department of Public Works
Humboldt Bay Trail, Eureka, CA, 95501
03-14-2023 at 11:00 AM
Renee Thomas
(530) 244-8464
(530) 244-8462
P.O. Box 990010, Redding, CA, 96099
PROJECT DETAILS:
Stewart Engineering Inc. is an Equal Opportunity Employer and will work with suppliers and subcontractors to identify opportunities and break down items into economically feasible units as reasonably necessary.
Stewart Engineering Inc. will be bidding the referenced project as a prime contractor. Plans and specifications for this project may be viewed at your local builders exchange and are available for review in our office. If you require additional information regarding the requirements of the contract, please don’t hesitate to contact our office. In order that we may give your bid maximum consideration, please supply us with a fax or email letter prior to the bid describing the scope of your work.
Stewart Engineering is signatory to the Labors Union Local 185 and Operators Union Local 3. We encourage and actively solicit proposals from DBE subcontractors and suppliers on all our projects. All qualified DBE subcontractors must be registered and certified by the California Department of Transportation. Prior to the bid, upon request, you can contact our office if you require assistance in bonding, lines of credit, insurance, obtaining necessary equipment, supplies, materials or services etc., which may be required by the Owner. Subcontractors must possess a current contractor’s license, worker’s compensation and insurance coverage during the entire length of the prime contract. All Subcontractors will be required to sign our standard Subcontract Agreement (AGC Long Form Standard Subcontract). If you require an advance copy to of the subcontract to look over please contact our office. You must be registered and provide your Department of Industrial Relations number.
